Previous
Page 1 / 2 - Jump to
Next
206051 Parking Brake and Actuation 206051 REMOVAL AND INSTALLATION Parking Brake Cable Rear 5 Removal and Installation Remove and discard the appropriate support brace front bolts To install tighten to 63 Nm 46 lbft All vehicles 1 With the vehicle in NEUTRAL position it on a hoist For additional information refer to Section 10002 2 Release the tension on the parking brake cable For additional information refer to Parking Brake Cable Tension Release in this section Convertible vehicles 3 All vehicles 4 Remove and discard the appropriate support brace rear bolts 6 To install tighten to 63 Nm 46 lbft Disconnect the appropriate rear parking brake cable from the front parking brake cable at the equalizer and release the cable from the body bracket Remove and discard the appropriate support brace upper bolts To install tighten to 63 Nm 46 lbft Copyright 2006 Ford Motor Company Last updated 6192006 2007 Mustang Mustang GT 82006