206051 Parking Brake and Actuation 206051 REMOVAL AND INSTALLATION Parking Brake Control Removal and Installation 1 2 3 4 With the vehicle in NEUTRAL position it on a hoist For additional information refer to Section 10002 5 Disconnect the parking brake switch electrical connector 6 Remove the 2 nuts from the parking brake control 7 Remove the floor console For additional information refer to Section 50112 8 Disconnect the front parking brake cable from the 2 rear parking brake cables at the equalizer and release the front cable from the body bracket 9 Copyright 2006 Ford Motor Company Last updated 6192006 Remove the 2 bolts from the parking brake control Release the tension on the parking brake cable For additional information refer to Parking Brake Cable Tension Release in this section To install tighten to 17 Nm 13 lbft To install tighten to 30 Nm 22 lbft Remove the parking brake control Position the cable and equalizer through the floorpan To install reverse the removal procedure Adjust the parking brake cable tension For additional information refer to Parking Brake Cable Adjustment in this section 2007 Mustang Mustang GT 82006